ДНІПРОМЕТИЗ ТАС
+38 (056) 378-72-48
Sales Manager of Welding Wire
+38 (067) 567-10-70
Sales Manager of Fencing Systems
+38 (067) 726-24-10
En

Low-carbon general purpose steel wire, heat-treated

Application

For the manufacture of nails, bindings, fences, wicker nets.

Diameter

0,5 - 13,00 mm

Steel grade

St1, St2, St3 of all degrees of deoxidization are according to DSTU 2770-94;

1006, 1008, 1010, 1011, 1012, 1013, 1015, 1016, 1017, 1018, 1020 are according to SOU MPP 77.140-236;

С4D, С7D, С9D, С10D, С12D, С15D, С18D, C20D  are according to DSTU EN 10016.

By the additional agreement with the Supplier the production of the wire with intermediate diameters is possible.

At the customer’s request it is possible to produce the wire with more strict requirements regarding the geometry and tensile strength, without oxide scale in the "light annealing" mode.

The production of oiled wire is possible.

Characteristics of wire of accuracy classes I, T1, T2 and T3
Nominal diameter, mm Wire diameter tolerance, mm

Tensile strength,

N/mm2(kg/mm2)
Relative elongation, %, not less Type of shipment – coils weight, kg
0,5 – 0,75 -0,04

290-490

(30-50)

15 small coils of free winding of 20-40
0,8 – 1,0 -0,05 15

small coils of free winding of 25-80;

heavy-weight coils of 550±50;

heavy-weight  coils of 950±50 of conic winding;

coils of "Rosette" type up to 300

1,1 – 1,2 -0,06 15
1,3 – 1,5 -0,10 15
1,6 – 2,0 -0,10 15

small coils of free winding of 30-80; 100 ±10;

heavy-weight coils of 950±50; 1950±100

coils of "Rosette" type up to 800;

coils of "Brehmen rings" type of 20-40

2,2 – 2,5 -0,12 15
2,8 – 3,2 -0,12 15
3,5 – 4,5 -0,16 15
5,0 – 6,0 -0,16 20
7,0 – 10,0 -0,20 20 heavy-weight coils of 300-400; 950±50; 1950±100
11,0 – 13,0 -0,20 20 coils of free winding of 300-500
The production of the wire with two-sided ultimate deviation is possible. The diameter tolerance should correspond to the values, stated in the table.
Diameter deviations of wire precision class Т1, Т2, Т3
Admissible tolerances on diameter of wire,  mm The range of diameters precision class,  mm
Т1 Т2 Т3
±0,012 0,25≤ d <0,33
±0,015 0,25≤ d <0,31 0,33≤ d <0,52
±0,020 0,31≤ d <0,55 0,52≤ d <0,91
±0,025 0,30≤ d <0,52 0,55≤ d <0,86 0,91≤ d <1,42
±0,030 0,52≤ d <0,74 0,86≤ d <1,24 1,42≤ d <2,05
±0,035 0,74≤ d <1,01 1,24≤ d <1,69 2,05≤ d <2,78
±0,040 1,01≤ d <1,31 1,69≤ d <2,20 2,78≤ d <3,63
±0,045 1,31≤ d <1,66 2,20≤ d <2,78 3,63≤ d <,4,60
±0,050 1,66≤ d <2,05 2,78≤ d <3,43 4,60≤ d <5,67
±0,060 2,05≤ d <2,94 3,43≤ d <4,94 5,67≤ d <8,17
±0,070 2,94≤ d <4,01 4,94≤ d <6,73 8,17≤ d ≤10.0
±0,080 4,01≤ d <5,23 6,73≤ d <8,78 -
±0,090 5,23≤ d <6,62 8,78≤ d ≤10.0
±0,100 6,62≤ d <8,17 -
±0,120 8,17≤ d ≤10.0
Diameter deviations of wire precision class I without coating
The range of diameters precision class I,  mm Admissible tolerances on diameter of wire,  mm
0,25≤ d <0,28 ±0,010
0,28≤ d <0,37 ±0,015
0,37≤ d <0,63 ±0,020
0,63≤ d <1,10 ±0,025
1,10≤ d <1,30 ±0,03
1,30≤ d <2,20 ±0,05
2,20≤ d <3,50 ±0,06
3,50≤ d <6,30 ±0,08
6,30≤ d ≤10,00 ±0,10
Dimensions of coils and packages of low-carbon steel wire

Wire diameter, mm

Coil weight, kg

Outer diameter of coil, mm

Inner diameter of coil, mm

Height, mm

Quantity of coils in package, pcs.

Outer diameter of package, mm

Inner diameter of package, mm

Height of package, mm

0,5 – 1,5

25 440 ±10 250 ±10 100 ±10 8

460 ±10

220 ±10

520 ±20

440 ±10*

240 ±10*

700 ±30*

50 450 ±10 230 ±10

140 ±10

6

470 ±20

200 ±20

430 ±30

450 ±10*

230 ±10*

610 ±20*

80

460 ±20

220 ±20

200 ±20

5

470 ±20

200 ±20

480 ±30

450 ±10*

230 ±10*

780 ±40*

1,0 – 1,5

550 ± 50

710 ±10

450

420 ±10

0,6 – 1,5

950±50

are of conic winding

top 700 ±10

355

580

base 745 ±10

1,6 – 2,8

50

620 ±20

470 ±20

80 ±20

8

640 ±20

440 ±20

480 ±60

630 ±20*

410 ±20*

850 ±30*

80

650 ±20

460 ±20

130±20

5

700 ±20

410 ±20

460 ±60

660 ±20*

420 ±20*

700 ±60*

100 ± 10

660 ± 20

460 ±20

150 ±20

5

700 ±20

410 ±20

460 ±60

660 ±20*

420 ±20*

700 ±60*

3,0 – 6,0

50

620 ±20

470 ±20

90 ±20

8

640 ±20

440 ±20 510 ±60

630 ±20*

410 ±20*

870 ±30*

80

650 ±20

460 ±20

140 ±20

5

700 ±20

410 ±20

510 ±60

660 ±20*

420 ±20*

720 ±60*

100 ± 10

660 ±20

460 ±20

160 ±20

5

700 ±20

410 ±20

510 ±60

660 ±20*

420 ±20*

720 ±60*

1,6 – 6,0

950 ± 100

830 ± 20

450 ± 10

440 ± 20

2,4 – 10,0

1950±100

960±20

500±10

650±20

2950±100

1050±20

620±10

840±20

5,5 – 8,0

80-300

750

500

80-300

5,5 – 10,0

80-300

850

600

80-300

6,0 – 13,0

500

1100±100

520 ±20

400

Сoils of “Rosette” type of the following sizes

Parameter

Rosette Size

Wire diameter, mm

0,8 – 1,5

1,6 – 4,0

Weight, kg

150±10

500±10

1000±10

Outer Diameter, mm

450 ±10

810 ±10

810 ±20

Inner diameter, mm

225 ±20

370 ±10

370 ±10

Height, mm

480 ±20

430 ±20

900 ±20

Plastic spools К-250А

Wire diameter, mm

Coil weight, kg

Outer diameter of coil, mm

Inner diameter of coil, mm

Height, mm

Inner diameter of spool, mm

0,25-0,55

до 20

250

160

200

36

“Brehmen rings”

Production of heat-treated wire is possible in coils of rectangular section – “Brehmen rings”

with the following technical requirements:

- diameters from 2,00 up to 5,00 mm; wire oiled/not oiled;

- tensile strength 300-400 N/mm2;

- the production of oiled wire is possible.


Overall dimensions of coils  “Brehmen rings”:

Coil weight, kg

Inner diameter, mm

Outer diameter, mm

Height, mm

20

100

250

100

30

210

310

150+2

40

210

330+5

150+2

Delivery:  coils weight – “Brehmen rings” - on pallet 960 kg, 1080 kg.

Coils with a special winding shape weighing 200 grams

Production of heat-treated wire is possible in coils with a special form winding of weight 200 grams

with the following technical requirements:

- diameters from 1,2 mm; 1,4 mm; 1,6 mm; wire not oiled;

- tensile strength 300-490 N/mm2;


Sizes acc. to drawing in mm:


a

b

c

d

e

44-52

17-20

39-43

23-26

65-70

Type of packaging: plastic buckets of 20 kg (100 coils)

Type of shipment: on pallet, net weight 720 kg (36 buckets)

Packaging

Type of shipment

Weight, kg

Material or combination of materials for packing

Plastic spools  К-250А

up to 20

Without additional packing

Stretch

Coil

20-100

Without additional packing

Stretch (for wire diam (0,5-0,8) mm

polyethylene film

inhibited film

 Package coils

Heavy-weight coil

Heavy-weight coil

(conical winding)

Heavy-weight coil

“Rosette”

180-500

550±50

950±50

950±50

1950±100

up to 1000

Without additional packing

Stretch  (for heavy-weight coils of conical winding

polyethylene film

inhibited film

polypropylene sleeve

inhibited film  + polypropylene sleeve

polyethylene film + polypropylene sleeve

two-layer sleeve (polypropylene with inhibited paper)